Breathalysers for workplace alcohol screening in Qatar: fuel cell or semiconductor

For HSE managers, site supervisors and transport operators choosing breath alcohol screening equipment: how the two sensor types differ, handheld and wall-mounted options, and what to plan for calibration and consumables.

Short answer

Breathalysers measure alcohol with one of two sensor types. Fuel cell sensors respond specifically to alcohol, stay stable for longer and are generally recalibrated about once a year, so they suit regular workplace screening. Semiconductor sensors cost less but are more prone to interference from other substances and need recalibration more often, so they suit occasional or personal checks. For screening many people quickly, wall-mounted fuel cell testers that need no mouthpiece are another option. Budget for mouthpieces and calibration as well as the device. Your testing policy, consent and what happens after a positive result are matters for your HR and legal advisers.

Two sensor types

Fuel cell sensors produce a small electrical current when alcohol in the breath sample is oxidised. They are used in professional breath alcohol testers because they respond specifically to alcohol: for example, they do not respond to acetone, which some other sensors can read as alcohol. They are typically recalibrated about once a year.

Semiconductor (metal oxide) sensors are common in lower-cost handheld testers. They are more prone to contamination and to interference from substances other than breath alcohol, and they usually need recalibration or sensor replacement more often, typically every six months.

Fuel cellSemiconductor
Response to alcohol onlyHighLower; other substances can interfere
Typical recalibrationAbout every 12 monthsAbout every 6 months
Purchase costHigherLower
Best suited toRoutine workplace screeningOccasional or personal checks

Always follow the calibration interval in the manufacturer's manual for your model, which can differ from these typical figures.

Handheld or wall-mounted

Handheld screeners are portable, so a supervisor can test at a gate, a vehicle or a work front. Most use a disposable mouthpiece or a replaceable blow cap for each person.

Wall-mounted testers sit at an entry point where many people pass. The Alcolizer Centurion Zero, for example, uses a fuel cell sensor and passive testing with no mouthpiece or straw. Alcolizer states it can screen up to 360 people an hour, shows a green or red screen for alcohol not detected or detected, stores over 30,000 test logs and is calibrated on site by exchanging its sensor module every 12 months. It runs on mains power and weighs about 4.5 kg. Wall-mounted units are not in our online catalogue with photos; ask us if you want one quoted.

The handheld testers in our catalogue

Sentech iBlow10ALCOSCAN AL7000
SensorFuel cell (SURACELL)Semiconductor
Result displayNumeric, plus zero / low / highLED
SampleReplaceable blow capMP1000 mouthpiece
Power6 × AA, alkaline or rechargeableBatteries
Weight370 g with batteries103 g with batteries
CalibrationFactory default: 5,000 tests or 12 monthsConfirmed in the quotation

These figures come from our catalogue listings. We could not check them against the manufacturer's website today, so we confirm the exact model and specification in each quotation.

What to budget for

  • The tester, chosen by sensor type and where testing happens
  • Mouthpieces or blow caps, one per person tested, if the model uses them; ask us for Alcoscan mouthpieces
  • Calibration at the interval in the manual, with a calibration record for each unit; ask us about calibration documentation
  • Batteries or mains power at the testing point
  • A log of tests, either built in or kept by the supervisor

Using a screener well

  • Follow the manual's instructions on waiting after eating, drinking, smoking or using mouthwash before a test
  • Use a new mouthpiece for each person where the model needs one
  • Store testers within the manufacturer's temperature range; avoid leaving handheld units in a parked vehicle in summer
  • Take units out of service when calibration is due

A breathalyser is a screening tool. Who is tested, consent, confirmation testing and what happens after a positive result belong in your written policy, agreed with your HR and legal advisers.

Related equipment

Blood pressure monitors and thermometers for site clinics are in our diagnostics and breathalysers category. See also our guide to blood pressure monitors for workplace clinics.

Products mentioned in this guide

Choosing alcohol screening equipment?

Tell us how many people you screen, where testing happens and whether you need handheld or wall-mounted units. We will reply with an itemised QAR quotation, including mouthpieces and calibration.

Request a quotation

Sources

  1. Alcolizer: Centurion Zero Tolerance product page, accessed 11 November 2026
  2. Alcolizer: Centurion Zero user manual (PDF), accessed 11 November 2026
  3. Alcolizer: breathalyser FAQ (calibration), accessed 11 November 2026
  4. Wikipedia: Breathalyzer (sensor types), accessed 11 November 2026

This guide covers equipment selection and upkeep. It is not medical or legal advice: follow your device's instructions for use and your organisation's safety procedures.